Sodick ALN400Qs Sodick Slow Wire Mechanical Specifications

X, Y, Z stroke 400mm * 300mm * 250mm U, V stroke 150mm * 150mm

Inner dimensions of machining pocket 850mm*745mm Taper machining control angle ±25° (plate thickness: 130mm)

Maximum workpiece size (spray water) 600mm*470mm*240mm Maximum workpiece size (water immersion) 600mm*470mm*230mm

Maximum processing material quality 500KG (water immersion), 350KG (water spray) electrode wire diameter 0.1mm - 0.3mm

Electrode wire feed speed 420mmsec ALN400Qs machine body size 2115mm*2335mm*2185mm

ALN400Qs installation size 3365mm*3660mm ALN400Qs total weight 3100KG

South Korea UGint drilling and milling tapping machining center UT380 specification

Workbench size 620×390mm Maximum load 150kg.f

Maximum travel distance X-axis 520mmY-axis 380mmZ-axis 350{480}mm

Distance from the end of the table to the end of the spindle 150~500{150～630} mm Distance from the front of the column to the center of the spindle 444mm

Servo motor power (X/Y/Z) 1.5/1.5/2.2 KW Spindle drive mode (X/Y/Z) 60/60/60m/min

Spindle power 3.7/5.5[2.2/3.7] [5.5/7.5]Kw

Spindle speed 12000 [15000] rpm spindle torque 3.57/1500 [2.12/1700] Kgf.m/rpm

Beijing fine carving CARVER400TE_AUH specification

X/Y/Z axis motion positioning accuracy 0.008/0.008/0.006mm X/Y/Z axis repeat positioning accuracy 0.005/0.005/0.005mm

X/Y/Z axis working stroke 400/400/350mm table size 490×430mm maximum working load 200Kg

Maximum spindle speed 32000rpm (Φ105) Shank size HSK-E32

Tool magazine capacity 15 fast moving speed 15m/min

Maximum cutting feed rate 10m/min drive system AC servo

Working voltage three-phase 380V/50Hz air source pressure ≥0.52MPa Machine tool total weight 4000Kg

Japan MAKINO (Makino) mirror spark machine EDGE3 specification

Stroke: 450X300X320mm Processing tank size: 800X550X350mm Maximum load: 800kg Maximum electrode load: 50kg

*High-precision machining for small molds: The most perfect equipment is realized by Makino's unique functions and rich processing technology. *High precision: The working coolant is always kept at plus or minus 0.5 degrees by the working coolant device to reduce the work. Thermal deformation caused by changes in liquid temperature. Provide high precision machining. * Uniform working surface: In the past, the processing will produce pinholes deeper than the surface roughness on the EDM surface, and this is used to solve this problem. Thereby shortening the grinding time. *Super spark function: By controlling the R process and sparking at the same time, the large electrode that can't cope with rapid bounce, there are many ribs, lateral processing and other processing greatly shorten the processing time.

AgieCharmilles Specifications

Itinerary X, Y, Z stroke 220 x 160 x 100mm

X. Y. Z axis U, V stroke ± 40mm

Maximum taper angle 3 / 80°/mm Workpiece and electrode Maximum workpiece size 300 x 200 x 80mm

Maximum workpiece weight 35 kg Wire circuit Diameter of the wire (standard) 0.07 – 0.20 (0.02 - 0.05) mm

Available weight and spool type (ISO standard) 2 x 8 kg