Precautions for gear reduction motors during installation

When installing and using the geared motor, please do not use it outside the specifications of the gear box and motor nameplate or catalogue to avoid electric shock, injury and damage to the device. At the same time, it is worth noting that please do not put your fingers or objects into the gear or motor opening and do not use the problematic gear box or motor, so as not to cause injury or fire. (Note: Generally speaking, the nameplate of the gear box or motor should not be removed, and the customer cannot modify the product privately. Because of the problems caused by the private modification of the gear box or the motor, it is not covered by the warranty, and the general company will not Take any responsibility.)

When moving the geared motor, please be careful not to fall off or dump. The selection of the gear reduction motor installation position, the side of the gear reduction motor installation position can not prevent flammable materials, prevent fire, this is because the gear reduction motor will generate a lot of heat when moving, if there is flammable material next to it is easy to cause Flammable materials burn and fire occurs. At the same time, if other items are placed next to the installation position, it will affect the ventilation and cooling of the gear reduction motor.

When installing the geared motor, follow the wiring diagram or the instruction manual to implement the connection with the power supply to avoid electric shock or fire.

When the geared motor is running, do not approach or release the rotating object (shaft, gear, etc.). When any debris is involved or injured, immediately turn off the power switch and dispose of it in time. Another thing to note is that when the power is off, the power switch must be cut off to prevent injury or damage to the device. Some geared motors have a thermal protector. When the temperature of the motor is abnormal, the power will be automatically cut off. When the temperature of the motor drops to a certain value, the motor will automatically resume operation.